โหลดอิเล็กทรอนิกส์ AC/DC
Product Model:
AN29(F) Series
Application:
High power single-phase power supply test
โหลดอิเล็กทรอนิกส์ AC/DC
ภาพรวมผลิตภัณฑ์
AN29(F) series AC/DC electronic load has flexible parallel and online functions. When multiple units are connected in parallel, they can expand the current and power, meeting testing requirements of high-power single-phase power supplies. When three-phase online, a three-phase load is formed to meet the three-phase power testing requirements. Multiple units can also be connected in parallel to form a high-power three-phase electronic load.
คุณสมบัติผลิตภัณฑ์
l CE
l Power Capacity: 1400W ~ 8400W
l Working voltage is low to 2V, and up to 350Vrms
l Current range: 10Arms ~ 60Arms, peak current: 45A ~ 270A
l Frequency range: 44 ~ 1000Hz, DC
l Peak factor: 1.4 ~ 5.0000
l Adjustable power factor, setting range 0-1.0
l 3 units in parallel to realize 3 phase load
l Work mode: Constant current CC, constant resistance CR, constant power CP
l Current shift: current shift can be adjusted under testing
l DC: Static loading, dynamic loading, 40 programming steps
l AC: Waveform simulation, sine, 3-15 harmonic, phase gate, crest factor
l Upper/lower limits adjustment, over limit alarming(GO/NG)
l Remote voltage detect sense port, used for precise measurement, eliminate wires voltage drop
l Protection function: Over voltage, over current, over power, over heat, DC reversed polarity. Measurement parameter: U, I, P, F and PF
Order information and extended functions
l AN29201(F): AC/DC Electronic Load 260V/10A/1400W
l AN29202(F): AC/DC Electronic Load 260V/20A/2800W
l AN29203(F): AC/DC Electronic Load 260V/30A/4200W
l AN29204(F): AC/DC Electronic Load 260V/40A/5600W
l AN29205(F): AC/DC Electronic Load 260V/50A/7000W
l AN29206(F): AC/DC Electronic Load 260V/60A/8400W
l RS485, GPIB optional
Production Function
l Waveform simulation
Test Function
l Power factor test
Simulate inductive and capacitive load, PF is from 0 to 1. If load current phase shift and PF are both need to set, PF can be set on front panel easily, do not need wire connection.
l Regulation test
Under CC mode, load current is just changing setting value, not with DUT output voltage. Please refer to the characteristic curve
l Dynamic performance test
Dynamic mode is switching between 2 levels in cycle, please refer to the characteristic curve. Dynamic current rising/dropping slope can be adjusted separately
l Programmable steps
4 groups, 10 steps/group. 4 groups can be parallel into 40 steps, and also can be divided into separated steps
l Connect in parallel and series
3 units in parallel to realize 3 phase load
การประยุกต์ใช้ผลิตภัณฑ์
High power single-phase power supply test
Technical specifications
Thai 
English 
รีวิว
ยังไม่มีบทวิจารณ์